Aluminum Electrolytic Capacitors MKR Features ‧ Endurance with ripple current at: 85℃, 5,000 hours ‧ High speed charge-discharge ‧ Suitable for high frequency regenerative voltage for AC servomotor, general inverter ‧ Suitable for equipment used at voltage fluctuating area and rectifier circuit of voltage doubler ‧ Application of charge-discharge DC voltage for 20 million times ‧ RoHS Compliance SPECIFICATIONS Items Category Temperature Range Capacitance Tolerance Leakage Current (at 20℃) Dissipation Factor (Tanδ at 120 Hz, 20℃) Low Temperature Characteristics (at 120Hz) Endurance of Charge / Discharge behavior Sleeve & Marking Color: Black & Golden Performance -25℃ ~ +85℃ ±20% (at 120Hz, 20℃) I=3CVor 5 (mA) whichever is smaller (after 5 minutes) Where, C= rated capacitance in µF. V = rated DC working voltage in V. See the Dimensions & Permissible Ripple Current Capacitance change : C(-25℃) / C(+20℃) ≧ 0.7 After an application of charge-discharge voltage for 20 million times, capacitors shall meet the characteristics requirement listed below. Charge discharge voltage (∆V) = rated voltage × 0.3 Frequency: 3 Hz Temperature: 15 ~ 35℃ Capacitor Change Dissipation Factor Leakage Current Appearance Within ±20% of initial value Less than 200% of specified value Within specified value There shall be found to remarkable abnormality on the capacitor Endurance Test Time Capacitance Change Dissipation Factor 5,000 hrs Within ±20% of initial value Less than 200% of specified value Leakage Current Within specified value * The above specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with rated ripple current applied for 5,000 hrs at 85℃. Test Time Capacitance Change Dissipation Factor 1,000 hrs Within ±20% of initial value Less than 200% of specified value Shelf Life Test Leakage Current Within specified value * The above specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hrs at 85℃ without voltage applied. The rated voltage shall be applied to the capacitors before the measurements (Refer to JIS C 5102-4.4). Frequency (Hz) Multiplier 50 / 60 0.7 100 / 120 1.0 300 1.1 1k 1.3 10k up 1.4 Ripple Current & Frequency Multipliers Ripple Current & Temperature Multipliers Temperature (℃) Multiplier 40 1.89 60 1.67 85 1.0 2011 Verison Aluminum Electrolytic Capacitors MKR DIAGRAM OF DIMENSIONS h a φD P W1 W2 H 51 22.0 61.0 65.5 21.0 15.0 7.0 64 28.6 72.5 78.0 25.0 20.0 7.0 77 32.0 85.5 91.0 35.0 20.0 8.0 90 32.0 101 106 34.5 20.0 8.0 Screw specifications: Plus hexagon-headed screw: M5×0.8×10 Max. screw tightening torque: 3.23Nm Unit: mm b 12.0 14.0 16.0 16.0 c 4.5 4.5 4.5 5.0 DIMENSION & PERMISSIBLE RIPPLE CURRENT V. DC Dimension: φD×L(mm) Tanδ: 120 Hz, 20℃ Ripple Current: A/rms at 120 Hz, 85℃ 450V (2W) Ripple Current 5.2 5.7 7.1 7.7 9.9 10.7 12.7 14.7 15.3 17.5 18.3 21.1 19.9 23.0 26.3 28.8 34.6 41.9 Size Code B075 B096 B115 B130 C096 C115 C130 D115 C195 D130 D155 E157 E157 E196 E236 φD×L 51×75 51×96 51×115 51×130 64×96 64×115 64×130 77×115 64×195 77×130 77×155 90×157 90×157 90×196 90×236 Tan δ 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 Ripple Current 4.5 5.3 6.8 7.9 8.4 10.5 12.5 14.3 17.5 16.1 19.2 23.6 25.3 30.2 35.0 350V (2V) Size Code B075 B075 B096 B096 B130 B130 C115 C130 C155 D115 D130 D155 E157 E157 E196 E236 φD×L 51×75 51×75 51×96 51×96 51×130 51×130 64×115 64×130 64×155 77×115 77×130 77×155 90×157 90×157 90×196 90×236 Tan δ 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 Ripple Current 5.6 6.3 7.7 8.5 10.7 11.9 13.8 15.9 18.6 21.6 25.7 28.8 31.5 38.9 45.2 Size Code B075 B075 B096 B096 B130 C096 C115 C130 D100 C155 D110 C195 D130 D155 E157 E157 E196 E236 400V (2G) φD×L 51×75 51×75 51×96 51×96 51×130 64×96 64×115 64×130 77×100 64×155 77×110 64×195 77×130 77×155 90×157 90×157 90×196 90×236 Tan δ 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 µF Item 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 12,000 15,000 18,000 *Special requirements are available upon request. Case Code φD L 75 96 115 130 155 157 195 196 236 51 B075 B096 B115 B130 - - - - - 64 - C096 C115 C130 C155 - C195 - - 77 - - D115 D130 D155 - - - - Unit: mm 90 - - - - - E157 - E196 E236 Part number system MKR series 3300µF ±20% 350V 51φ×130L Pb-free Terminal + PVC Sleeve MKR Series name 332 Capacitance Example: 2,700 272 M Capacitance tolerance M=±20% 2V Rated voltage Example: 350 2V - Terminal type B130 Case size Example: 51×130 Terminal and Sleeve Type B130 2011 V ersion